首 頁     關於我們     公司簡介     新聞信息     聯繫我們     職位招聘

	Terminal Blocks Features Nylon, feed-through, screw clamp and spring clamp Terminal Block for DIN rail and Panel Mounting. Wide range covering multiple connections, grounding, distribution, safety fuse link, disconnect, double/triple levels, PCB and electronic Terminal Blocks. Secure grip of screw clamps with special serrations over solid or stranded wires. Rolled screws provide calibrated tightening torque for securing wires in the clamp. Special spring steel clamps ensure a tight, yet gentle "non-fraying" grip over solid or stranded wires. Finely crafted current bar ensures "safe bridge" for the rated current. Series 'U' Terminals, with unique clamping foot suitable for DIN 35, DIN 35-15 and DIN 32, offer flexibility to permit low stock levels to Distributors, Panel Builders and Users. Carry UL and CSA marks for North America and VDE and CE mark for Europe. Terminal Blocks - Range Screw Clamp, Polyamide 66 Terminal Blocks Standard, Feed-Through Multi-Connection, Feed-Through Double-Level, Feed-Through Triple-Level, Feed-Through Distribution Blocks Micro, Feed-Through Panel Mount, Feed-Through Safety Fuse Link, Feed-Through Disconnect and Test Tab, Feed-Through Grounding, Neutral Terminals and Busbar Systems Feed-Through, For Highly Corrosive and Explosive Environments Clip, Feed-Through Active, Feed-Through Thermocouple Spring Clamp, Polyamide 66 Terminal Blocks Standard, Feed-Through Multi-Connection, Feed-Through Grounding (Earth) Panel Mount, Feed-Through PCB, Modular, Polyamide 66 Terminal Blocks Accessories for Terminal Blocks End Clamps Mounting Rails Mounting Brackets End Plates Partition Plates Cross Connecting Accessories Markers Marker Holders Protective Covers and Holding Plates Screw Clamp, Polyamide 66 Terminal Blocks Standard Feed-Through SCRW2.5U 45 x 43 x 5 mm IEC/EN : 0.5-2.5 mm2, 24 A, 750 V, 0.4 Nm UL/CSA : 22-14 AWG, 20 A, 600 V, 7 lb-in SCRW4U 45 x 43 x 6 mm IEC/EN : 0.5-2.5 mm2, 32 A, 750 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 600 V, 9 lb-in SCRW6U 47 x 43 x 8 mm IEC/EN : 1.5-6 mm2, 41 A, 750 V, 0.8 Nm UL/CSA : 22-8 AWG, 50 A, 600 V, 9 lb-in SCRW10U 47 x 43 x 10 mm IEC/EN : 1.5-10 mm2, 57 A, 750 V, 1.2 Nm UL/CSA : 15-7 AWG, 50 A, 600 V, 14 lb-in SCRW16U 47 x 43 x 12 mm IEC/EN : 2.5-16 mm2, 76 A, 750 V, 2.0 Nm UL/CSA : 14-6 AWG, 70 A, 600 V, 14 lb-in SCRW25U 50 x 49.5 x 12 mm IEC/EN : 6-25 mm2, 101 A, 750 V, 2 Nm UL/CSA : 9-3 AWG, 115 A, 600 V, 14 lb-in SCRW35U 58 x 52.5 x 15 mm IEC/EN : 10-35 mm2, 125 A, 750 V, 2.5 Nm UL/CSA : 7-2 AWG, 145 A, 600 V, 25 lb-in SCRW50U 75.5 x 71 x 20.5 mm IEC/EN : 16-50 mm2, 150 A, 1000 V, 6.8 Nm UL/CSA : 2/0-6 AWG, 150 A, 600 V, 60 lb-in SCRW95U 90 x 83 x 25 mm IEC/EN : 16-95 mm2, 232 A, 1000 V, 18.2 Nm UL/CSA : 4/0-2 AWG, 230 A, 600 V, 160 lb-in Back Multi Connection Feed-Through SCRW4U 1-2 47 x 46.5 x 6 mm IEC/EN : 0.5-4 mm2, 32 A, 600 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 600 V, 7 lb-in SCRW4U 2-2 51.5 x 65 x 6 mm IEC/EN : 0.5-4 mm2, 32 A, 600 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 600 V, 7 lb-in Back Double Level, Feed-Through DBL4U 54 x 55 x 6 mm IEC/EN : 0.5-4 mm2, 32 A, 400 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 300/600 V, 6 lb-in DBL4U(I.S) 54 x 55 x 6 mm IEC/EN : 0.5-4 mm2, 32 A, 400 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 600 V, 7 lb-in DBLOFF4U 63 x 68 x 6 mm IEC/EN : 0.5-4 mm2, 32 A, 600 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 600 V, 7 lb-in Back Triple Level, Feed-Through TL2.5U 67 x 84 x 6 mm IEC/EN : 0.5-2.5 mm2, 24 A, 300 V, 0.4 Nm UL/CSA : 22-12 AWG, 25 A, 300 V, 4.5 lb-in TL2.5UH 67 x 61 x 6 mm IEC/EN : 0.5-2.5 mm2, 24 A, 300 V, 0.4 Nm UL/CSA : 22-12 AWG, 25 A, 300 V, 4.5 lb-in TL2.5UHL 67 x 61 x 6 mm IEC/EN : 0.5-2.5 mm2, 24 A, 300 V, 0.4 Nm UL/CSA : 22-14 AWG, 20 A, 300 V, 7 lb-in Back Distribution Blocks DISBL4 45 x 43 x L mm IEC/EN : Input : 6-16 mm2, 750 V, 2.0 Nm Output Each : 0.5-4 sq.mm, 32 A, 750 V, 0.5 Nm UL/CSA : Input : 10-8 AWG, 50 A, 600 V, 26 lb-in Output Each : 22-12 AWG, 25 A, 600 V, 7 lb-in DISBL4(1) 45 x 43 x L mm IEC/EN : Input : 6-16 mm2, 750 V, 2.0 Nm Output Each : 0.5-4 sq.mm, 32 A, 750 V, 0.5 Nm UL/CSA : Input : 10-8 AWG, 50 A, 600 V, 26 lb-in Output Each : 22-12 AWG, 25 A, 600 V, 7 lb-in DISBL6 47 x 43 x L mm IEC/EN : Input : 6-25 mm2, 750 V, 3 Nm Output Each : 1.5-6 sq.mm, 41 A, 750 V, 0.8 Nm UL/CSA : Input : 10-6 AWG, 95 A, 600 V, 25 lb-in Output Each : 22-8 AWG, 50 A, 600 V, 9 lb-in DISBL10 43 x 48 x L mm IEC/EN : Input : 10-35 mm2, 750 V, 6 Nm Output Each : 1.5-10 sq.mm, 57 A, 750 V, 1.2 Nm UL/CSA : Input : 8-1/0 AWG, 130 A, 600 V, 53 lb-in Output Each : 20-6 AWG, 65 A, 600 V, 14 lb-in Back Micro, Feed-Through M4 29 x 27 x 6 mm IEC/EN : 0.5-4 mm2, 32 A, 400 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 300/600 V, 6 lb-in M4S 29 x 27 x 6 mm IEC/EN : Upto 1.5 mm2, 15 A, 160 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 300 V, 7 lb-in M4SU 29 x 27 x 6 mm IEC/EN : Upto 1.5 mm2, 15 A, 160 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 300 V, 7 lb-in Back Panel Mount, Feed-Through P4 28 x 27 x 6 mm IEC/EN : 0.5-4 mm2, 32 A, 400 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 300 V, 6 lb-in Back Safety Fuse Link, Feed-Through for Ø5 x 20/25 mm fuse F4U 43 x 58 x 8 mm IEC/EN : 0.5-4 mm2, 6.3 A, 750 V, 0.5 Nm UL/CSA : 22-12 AWG, 6.3 A, 600 V, 7 lb-in F4U(L) 43 x 58 x 8 mm IEC/EN : 0.5-4 mm2, 6.3 A, 750 V, 0.5 Nm UL/CSA : 22-12 AWG, 6.3 A, 600 V, 7 lb-in for Ø5 x 20/25 mm fuse with indicator for Ø5 x 20/25 mm fuse, double level FDBL4U 66 x 88 x 8 mm IEC/EN : 0.5-4 mm2, 6.3 A/32 A, 600 V, 0.5 Nm UL/CSA : 22-12 AWG, 6.3 A/25 A, 600 V, 7 lb-in FBDBL4UE 66 x 88 x 8 mm IEC/EN : 0.5-4 mm2, 6.3 A/32 A, 600 V, 0.5 Nm UL/CSA : 22-12 AWG, 6.3 A/25 A, 600 V, 7 lb-in for Ø5 x 20/25 mm fuse, double level with indicator for Ø5 x 20/25 mm fuse, double level with indicator FDBL4UE(LR) 66 x 88 x 8 mm IEC/EN : 0.5-4 mm2, 6.3 A/32 A, 600 V, 0.5 Nm UL/CSA : 22-12 AWG, 6.3 A/25 A, 600 V, 7 lb-in FA4UN 60 x 43 x 8 mm IEC/EN : 0.5-4 mm2, 32 A, 750 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 600 V, 7 lb-in for Ø5 x 20/25 mm fuse for Ø5 x 20/25 mm fuse F6U 60 x 43 x 8 mm IEC/EN : 1.5-6 mm2, 6.3 A, 750 V, 0.8 Nm UL/CSA : 22-8 AWG, 6.3 A, 600 V, 14 lb-in FA4U 50 x 72 x 9 mm IEC/EN : 0.5-4 mm2, 6.3 A, 600 V, 0.5 Nm UL/CSA : 22-12 AWG, 6.3 A, 600 V, 7 lb-in for Ø1/4" x 11/4" mm fuse Back Disconnect And Test KN4U 46 x 46.3 x 6 mm IEC/EN : 0.5-4 mm2, 16 A, 750 V, 0.5 Nm UL/CSA : 22-12 AWG, 16 A, 600 V, 7 lb-in DISCT6U 57 x 63 x 8 mm IEC/EN : 1.5-6 mm2, 41 A, 750 V, 1.2 Nm UL/CSA : 16-8 AWG, 41 A, 600 V, 14 lb-in DISCT6US 57 x 63 x 16 mm IEC/EN : 1.5-16 mm2, 10 A, 300 V, 1.2 Nm UL/CSA : 16-8 AWG, 10 A, 300 V, 14 lb-in DISCTL4UN 60 x 43 x 8 mm IEC/EN : 0.5-4 mm2, 32 A, 750 V, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 600 V, 7 lb-in DISCTL6U 60 x 43 x 8 mm IEC/EN : 1.5-6 mm2, 6.3 A, 750 V, 0.8 Nm UL/CSA : 22-8 AWG, 6.3 A, 600 V, 14 lb-in Back Tab, Feed Through TAB4U 49.5 x 47 x 6 mm, 6.3 x 0.8 mm IEC/EN : 0.5-4 mm2, 32 A, 750 V, 6.3 x 0.8 UL/CSA : 22-12 AWG, 25 A, 300 V TABUT 49.5 x 47 x 6 mm, 6.3 x 0.8 mm IEC/EN : 0.5-4 mm2, 32 A, 750 V, 6.3 x 0.8 UL/CSA : 22-12 AWG, 25 A, 300 V Back Grounding, Neutral Terminals And Busbar Systems G4 45.5 x 54.2 x 6 mm IEC/EN : 0.5-4 mm2, 32 A, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 7 lb-in G10 49.5 x 45 x 10 mm IEC/EN : 1.5-10 mm2, 57 A, 1.2 Nm UL/CSA : 16-8 AWG, 65 A, 14 lb-in G35 61.5 x 58 x 16 mm IEC/EN : 10-35 mm2, 125 A, 2.5 Nm UL/CSA : 8-3 AWG, 145 A, 25 lb-in GM4 28.5 x 27 x 6 mm IEC/EN : 0.5-4 AWG, 32 A, 0.5 Nm UL/CSA : 22-12 AWG, 25 A, 7 lb-in GN4 30 x 23.3 x 7.5 mm IEC/EN : 0.5-6 mm2, 41 A, 0.8 Nm UL/CSA : 22-12 AWG, 25 A, 14 lb-in GN16 36 x 23.3 x 9.8 mm IEC/EN : 6-16 mm2, 76 A, 2.0 Nm UL/CSA : 9-6 AWG, 76 A, 14 lb-in GN35 45 x 27.3 x 14.5 mm IEC/EN : 10-35 mm2, 125 A, 2.5 Nm UL/CSA : 7-2 AWG, 125 A, 25 lb-in Back Feed-Through, For Highly Corrosive And Explosive Environments SCRW2.5UCR/4UCR 45 x 43 x 5/6 mm IEC/EN : 0.5-2.5/4 mm2, 24/32 A, 750 V, 0.4/0.5 Nm UL/CSA : 22-14/12 AWG, 20/25 A, 600 V, 7 lb-in SCRW6UCR/10UCR 47 x 43 x 8/10 mm IEC/EN : 1.5-6/10 mm2, 41/57 A, 750 V, 0.8/1.2 Nm UL/CSA : 22/15-8/7 AWG, 50/65 A, 600 V, 9/14 lb-in SCRW16UCR 47 x 43 x 12 mm IEC/EN : 2.5-16 mm2, 76 A, 750 V, 2.0 Nm UL/CSA : 14-6 AWG, 70 A, 600 V, 14 lb-in SCRW25UCR 50 x 49.5 x 12 mm IEC/EN : 6-25 mm2, 101 A, 750 V, 2.0 Nm UL/CSA : 9-3 AWG, 115 A, 600 V, 14 lb-in SCRW35UCR 58 x 52.5 x 15 mm IEC/EN : 10-35 mm2, 125 A, 750 V, 2.5 Nm UL/CSA : 7-2 AWG, 145 A, 600 V, 25 lb-in Back Clip, Feed-Through SCRW4UCLIP 67 x 43 x 6 mm IEC/EN : 0.5-4 mm2, 10 A, 250 V UL/CSA : 22-12 AWG, 10 A, 300 V, 2.4 x 0.8 mm DBL4UCLIP 84 x 55.5 x 6 mm IEC/EN : 0.5-4 mm2, 10 A, 250 V UL/CSA : 22-12 AWG, 10 A, 300 V, 2.4 x 0.8 mm Back Active, Feed-Through (for surge protection) DBL4UELA 54 x 55.5 x 12 mm IEC/EN : 0.5-4 mm2, 20 A, 10 A UL/CSA : 22-10 AWG, 75 V, 90 V, 240 V, 600 V, 1000 VDC, 20 KA (8/20 us), 100 ns, <1.5pF DBL4UE3LA 54 x 55.5 x 12 mm IEC/EN : 0.5-4 mm2, 10 A, 5 A UL/CSA : 22-10 AWG, 90 V, 250 V, 350 V,450 VDC, 10 KA (8/20 us), 100 ns, <1.0pF DBL4UEMOV 54 x 55.5 x 12 mm IEC/EN : 0.5-4 mm2, 10 A UL/CSA : 22-10 AWG, 30 V, 60 V, 75 V, 130 V, 275 V, 460 V, 510 V, 625 V, 680 V, 2KA-6.5KA (8/20 us), <25 ns DBL4UESD 54 x 55.5 x 12 mm IEC/EN : 0.5-4 mm2, 10 A UL/CSA : 22-10 AWG, 12 V to 48 V-/12V to 160 V~,1.5 KW, 1ns(D.C)/5ns(A.C) DBL4UERC 54 x 55.5 x 12 mm IEC/EN : 0.5-4 mm2, 20 A, 10 A UL/CSA : 22-10 AWG, 250 V ~/630 V - Back Thermocouple (for accurate temprature measurement) CTT2.5UK/J/T 45 x 43 x 10 mm IEC/EN : 0.5-2.5 mm2, 10 A, 750 V UL/CSA : 24-14 AWG, 300 V, 7 lb-in Back Spring Clamp, Polyamide 66 Terminal Blocks Standard Feed-Through CAGE2.5 36 x 58 x 5 mm IEC/EN : 2.5 mm2, 24 A, 750 V UL/CSA : 22-14 AWG, 20 A, 600 V CAGE4 42 x 65 x 6 mm IEC/EN : 4 mm2, 32 A, 750 V UL/CSA : 22-12 AWG, 25 A, 600 V CAGE6 45 x 72 x 8 mm IEC/EN : 6 mm2, 41 A, 750 V UL/CSA : 22-8 AWG, 50 A, 600 V Back Multi-Connection, Feed-Through CAGE2.5 1-2 36 x 74 x 5 mm IEC/EN : 2.5 mm2, 24 A, 750 V UL/CSA : 22-14 AWG, 20 A, 600 V CAGE4 1-2 42 x 85 x 6 mm IEC/EN : 4 mm2, 32 A, 750 V UL/CSA : 22-12 AWG, 25 A, 600 V CAGE6 1-2 45 x 94 x 8 mm IEC/EN : 6 mm2, 41 A, 750 V UL/CSA : 22-8 AWG, 15 A, 600 V CAGE2.5 2-2 36 x 90 x 5 mm IEC/EN : 2.5 mm2, 24 A, 750 V UL/CSA : 22-14 AWG, 20 A, 600 V CAGE4 2-2 42 x 105 x 6 mm IEC/EN : 4 mm2, 32 A, 750 V UL/CSA : 22-12 AWG, 25 A, 600 V CAGE6 2-2 45 x 116 x 8 mm IEC/EN : 6 mm2, 41 A, 750 V UL/CSA : 22-8 AWG, 15 A, 600 V Back Grounding (Earth) CAGEG2.5 36 x 58 x 5 mm IEC/EN : 2.5 mm2, 24 A UL/CSA : 22-14 AWG, 20 A CAGEG4 42 x 65 x 6 mm IEC/EN : 4 mm2, 32 A UL/CSA : 22-12 AWG, 25 A CAGEG6 45 x 72 x 8 mm IEC/EN : 6 mm2, 41 A UL/CSA : 22-8 AWG, 50 A Back Panel Mount, Feed-Through CAGEP2.5 27 x 35 x 5 mm IEC/EN : 2.5 mm2, 24 A, 750 V UL/CSA : 22-14 AWG, 20 A, 600 V CAGEP2.5 2-2 27 x 35 x 10 mm IEC/EN : 2.5 mm2, 24 A, 750 V UL/CSA : 22-14 AWG, 20 A, 600 V Back PCB, Modular, Polyamide 66 Terminal Blocks PCBM5H 42 x 65 x 6 mm IEC/EN : 4 mm2, 32 A UL/CSA : 22-12 AWG, 25 A, 300 V PCBM5A 42 x 65 x 6 mm IEC/EN : 4 mm2, 32 A UL/CSA : 22-12 AWG, 25 A, 300 V PCBM5V 42 x 65 x 6 mm IEC/EN : 4 mm2, 32 A UL/CSA : 22-12 AWG, 25 A, 300 V PCB5 18 x 19 x 5 mm IEC/EN : 0.5 - 2.5 mm2, 18 A, 250 V UL/CSA : 22-14 AWG, 18 A, 300 V, 7 lb-in PCB7.5 19 x 19 x 7.5 mm IEC/EN : 0.5 - 2.5 mm2, 18 A, 450 V UL/CSA : 22-14 AWG, 18 A, 300 V, 7 lb-in PCBDDBL11 28 x 22 x 11 mm IEC/EN : 0.5 - 2.5 mm2, 24 A, 300 V UL/CSA : 22-12 AWG, 25 A, 300 V, 7 lb-in Back Accessories for Terminal Blocks End Clamps for secure positioning of the Terminals ES1S for DIN 35 rails ES2S for DIN 35-15 rails ES3S for DIN 32 rails ES1N for DIN 15 rails ES2N for DIN 32/35/35-15 rails ES3N for DIN 35/35-15 rails ES4N for DIN 32 rails Back Mounting Rails DIN 32 Rail DIN 35 Rail DIN 35 - 15 Rail DIN 15 Rail Back Mounting Brackets B1S for all rails, at an angle B35N for panel mount terminals, on DIN 35 rails Back End Plates Back Partition Plates Back Cross Connecting Accessories Shorting Sleeves Insulated Pre Assembled Shorting Liks Permanent and Removable Shorting Links Shorting Stud Insulated Push-In Type Shorting Liks Comb Links Back Markers K Markers Insert Markers Group Markers Back Marker Holders GRPMK6 GRPMK7 Back Protective Covers And Holding Plates Cover SlidePL1 Back